Model GRP200 Moisture Meter

Direct Instant Reading
Fiberglass (GRP) % Moisture Content

For Fiberglass & All Kinds Of Wood

Rear Sensor Pad Reads Up To 1.5-inch (4 cm) Depth

Selectable Settings For GRP, Teak, Meranti Plywood, & Balsa
Digital Display 0 to 99% for Wood, 0 to 9.9% for GRP
Electronic Calibration 0 to 1.5% for GRP, 0 to 30% for Wood

Comprehensive Owners Manual
Manual Calibration Chart For Any Wood (density 0.2 to 0.9 gm/cc)
Manual GRP Calibration Chart, Range 0 to 3.0%
User Accessible Zero & Calibration Fine Adjustments
Low Battery Warning (Two 9-volt Batteries Included)
Meter Dimensions 5.3 x 3.3 x 1.5 inches. Weight 12 oz.

Customer Comments...
"I have compared this meter with many surveyors with expensive moisture meters.
It has performed extremely well, including through anti-foul coatings and paint."
... D.H., Ontario, Canada


Optional Plug-In Remote Sensor GRP200S

Reach Into Awkward Places With Sensor On 3-foot Cable
Same Range, Sensitivity, & Depth Penetration As GRP200 Rear Sensor

Photo Gallery
Click On An Image For Larger View
Some Privacy Software May Block These Pop-Up Windows

INFORMATION SHEET

The GRP200 Is Available From:
J. R. Overseas Company

&
Electrophysics

ORDER NOW ONLINE

Electrophysics Moisture Meters Warping Nightmares Building Inspection
Fiberglass Boats Dual-Mode Meter Pinless Remote Pin-Type Meters
Pinless Meters Ordering Information Request Catalog Send email